Factory Outlets Bellin Packaging production line – Bottle Blowing Machine -zun shang

Contact Now

Product Detail

Product Tags

Feedback (2)

High quality Initial,and Buyer Supreme is our guideline to offer the ideal assistance to our shoppers.At present, we are striving our best to become amongst the ideal exporters inside our industry to satisfy shoppers more want for Potato chips Packaging line , oatmeal Packaging line , Detergent Packaging equipment , Welcome to make contact with us if you're fascinated inside our product, we are going to provide you with a surprice for Qulity and Value.

Factory Outlets Bellin Packaging production line – Bottle Blowing Machine -zun shang Detail:

Z-sun ty8800 high-speed one out six full-automatic bottle blowing machine, through continuous technical updates and design improvements, fully servo electric drive, is currently stable at 2000 bottles / hour -10000 bottles / hour, especially suitable for the production of water, beverages, condiments, food packaging and other bottles and cans, with high speed, continuous 24-hour stable work, and an original thermostatic control system, which reduces energy consumption by more than 25%.

At present, there are one out of two, one out of four, one out of six specifications, which are characterized by:

1. Taiwan Delta PLC microcomputer controller is adopted, with man-machine interface and simple operation

2. The patented automatic feeding device can transfer the blank bottle from the feeding trough to the multi position mechanical arm, with high transmission efficiency and stable work. The intelligent early warning feeding system will automatically alarm when there is no bottle blank in the feeding silo to remind workers to feed, save time and improve production efficiency.

3. Patented automatic bottle blowing machine transmission system, unique bottle blank base design, fast transmission speed, low energy consumption

4. The original constant temperature control infrared heating system, with the temperature of each infrared lamp controlled independently, ensures that the bottle blank is heated evenly, and improves the success rate of bottle blowing.

5. Full servo electric drive, high bottle blowing efficiency, stable operation, relative to hydraulic drive, no pollution, low noise

6. The key pneumatic components are imported from abroad, with stable and accurate operation and long service life

7. The double arm connecting rod mold locking structure design, which has been optimized and improved for many times, is more reasonable in structural design and has strong mold locking force. It is equipped with aviation aluminum bottle blowing machine mold, which is light in weight, convenient and fast to replace mold, and less energy consumption

8. Air bag supercharging plate is adopted to effectively solve the problem of bulky mold expansion and mold closing line

9. The whole machine adopts super standard anti-seismic structure design, with strong anti-seismic capacity and strong equipment stability

10. The intelligent fault early warning system can automatically alarm in case of equipment failure, and can quickly locate the fault location and maintain it quickly

11. Equipped with gas source recovery system, it can recover and save more than 25% of high-pressure gas.

Technical parameters of one out six bottle blowing machine

Project		Unit	TY-HS8800
Molding group specification	Bottle spacing	mm	76
Molding group specification	Number of cavities	cav	6
Bottle type specification	Maximum bottle capacit	L	0.6
	Tooth size	mm	18-38
	Maximum bottle diameter	mm	68
	Maximum bottle height	mm	240
Theoretical capacity		hph	9000
Host power Specifications	Maximum heating power	kw	72
Host power Specifications	heating power	kw	30
High pressure air compressor	Bottle blowing pressure	mpa	30
High pressure air compressor	High pressure gas consumption	m3/min	5
Low pressure air compressor	pressure	map	5
Low pressure air compressor	Low pressure gas consumption	m3/min	0
Specifications of mainframe	Host size	m	4.6×1.5×2.5
Specifications of mainframe	Weight of mainframe	kg	7000

Take one out of six as an example: the bottle blowing machine can stabilize 9000 bottles / hour for bottles less than 0.6L, can blow bottles with a maximum capacity of 0.6L, the maximum diameter of the bottle is 70mm, the maximum height of the bottle is 240mm, the size of the host is length x width x height: 4.8x2x2.5m, the weight is about 6.5 tons, and the energy consumption of the host equipment is 30kW left and right.

Product detail pictures:

Related Product Guide:

Well-run devices, expert profits group, and better after-sales companies; We have been also a unified huge family, everybody keep on with the organization worth "unification, determination, tolerance" for Factory Outlets Bellin Packaging production line – Bottle Blowing Machine -zun shang , The product will supply to all over the world, such as: Malaysia , Doha , Marseille , Many kinds of different solutions are available for you to choose, you can do one-stop shopping here. And customized orders are acceptable. Real business is to get win-win situation, if possible, we would like to deliver more support for customers. Welcome all nice buyers communicate details of solutions with us!!

AAT Packaging line